IBA KOREA SYSTEM_JPN
IBA - データ分析システム
様々なアプリケーションやニーズに合わせて設計します。
IBAは、 測定されたデータの収集、記録、分析、再解釈などに必要なハードウェア及びソフトウェアで構成されたデータ収集装置及び分析ツールです。

モジュール化された設計とシンプルなシステムの構成で、IBAシステムはいかなる規模のデータ収集はもちろん、様々なアプリケーションやニーズに合わせてシステムを設計、構成し使用することができます。このようなコンセプトを通じて、64チャンネルのシンプルなポータブルの収集装置から数千個のデータを一度に収集することができるサーバーまで構築可能です。また、一回の設置後、ニーズに応じて既存システムを簡単にアップグレードすることができます。

System Interfaces - ibaLink

본문

System interfaces

Connection of VME based PLC systems to ibaPDA-V6 or ibaLogic

 

ibaLink-VME

ibaLink-VME

  • Connection of VME based PLC systems to ibaPDA-V6 or ibaLogic
  • Backwards compatible to ibaLink-SM-128V-i-2o
  • Can be used in all common VME32 and VME64 systems
  • Bidirectional fiber optic link for analog and digital inputs and outputs
  • Unidirectional fiber optic link for analog and digital outputs or diagnosis
  • Supported ibaNet protocols: 3Mbit, 32Mbit and 32Mbit Flex
  • Flexible setting of data rate, data size and formatting with 32Mbit Flex
  • Different operation modes (cascading, peer-to-peermode)
  • Power supply via VMEbus
  • Fast data transfer due to Dual Port RAM technology
  • Block consistent mode

The ibaLink-VME card can be used to connect VME based PLC systems via fiber optics to the data capturing system ibaPDA-V6 or the Soft-PLC ibaLogic in order to transfer measured data.

ibaLink-VME is the successor of the ibaLink-SM-128Vi-2o card and completely compatible with the previous functions in 3Mbit mode. Moreover ibaLink-VME offers new functions using the ibaNet protocols 32Mbit and 32Mbit Flex.

 

ibaNet protocols

Depending on the ibaNet protocol the card supports different applications:

3Mbit

This mode is compatible with the predecessor ibaLink-SM-128V-i-2o. Cascading of up to 8 devices is possible on the input and output (I/O extension for PLC systems) and 2x 64 analog + 64 digital values can be transmitted with a fixed rate of 1 ms.

32Mbit

Two VME systems can be coupled in peerto-peer mode. On the 2nd diagnostic output parallel measuring with ibaPDA is possible. The update rate can be adjusted between 50 µs and 1.4 ms.

32Mbit Flex

This mode provides the highest flexibility for data exchange with ibaPDA, since transmission rate, size and formatting of data can freely be set. For small amounts of data the cycle time can be faster, up to 25 µs with 65 bytes. The maximum amount of data is 4060 bytes at 1.4 ms.

Moreover, with 32Mbit Flex, it is possible to connect up to 15 devices in a ring topology.

 

Supported VME systems and modes

The ibaLink-VME can be used in both VME32 and VME64 systems. The card occupies 256 kbyte of VME addressing space. The address can be configured using DIP switches.

The following modes of VME access are supported:

  • Addressing modes A24, A32, A40, A64 with data formats 8/16/32 bit (D08/D16/D32/MD32)
  • 8/16/32/64 block transfer modes (BLT/MBLT)

When consistency of a complete data block is needed, a special „consistency mode“ could be enabled by setting a DIP switch.